Almost Anything Audio
HOME

VISIT THE
SHOWROOM

SPECIAL
DEALS

SERVICE
 CALLS

CONTACT
 DETAILS

MANUFACTURERS
HOME SITES

AMIS Public Address Amplifiers

Back to PA Amplifiers

For over 25 years Australian Monitor have been designing and developing
innovative and robust products for the commercial and professional
market. Australian Monitor is distributed in over 75 countries and serviced
by nine warehouses in four continents.

Australian Monitor IC30

The IC30 is a 3 channel, 30 watt mixer amplifier designed for both AC and 12 volt DC operation. The amplifier is a self contained compact unit of solid steel construction suitable for table or desk mounting. An optional rack mount kit is also available.
IC30 Mixer amplifier. 30 watt. 3 dual bal mic/line input. 100v, 70v, 4 ohms. 240 VAC, 12 VDC. $235.00 inc GST
 

The Australian Monitor Installation Series AMC line of amplifiers takes the heritage and reliability of our famous AMIS series and integrates these features into a low cost amplifier format for applications where reliability is everything, but the more elaborate features of our AMIS series are not required. Available in 30, 60, 120 and 250 watt versions the AMC series are a 2 RU mixer amplifier featuring 100 volt line and 4 ohm outputs, and 3 universal mic/line inputs. Master volume and overall treble and bass controls are provided, along with Vox triggered muting (defeatable) giving channel 1 priority over inputs 2 and 3. There is also facility to internally add a tone generator card. The Australian Monitor AMC series gives the contractor a low cost alternative in applications that are cost sensitive, but still require a high quality of sound reproduction and reliability.

30, 60,120 and 250 watt models
2 RU rack mountable chassis
4 XLR mic/dual RCA line inputs
100 volt or 4 ohm output on amplifiers
Input 1 has Vox muting priority (internally defeatable)
Optional Alert/Evac/Pre Announce/Bell tone board available
12VDC phantom power

AMC30+ Mixer amplifier. 30 watts. 4 x dual bal mic/line inputs. 100v, 4 ohm. 230 VAC. 2 X RU $280.00 inc GST
AMC60+ Mixer amplifier. 60 watts. 4 x dual bal mic/line inputs. 100v, 4 ohm. 230 VAC. 2 X RU $415.00 inc GST
AMC120+ Mixer amplifier. 120 watts. 4 x dual bal mic/line inputs. 100v, 4 ohm. 230 VAC. 2 X RU $449.00 inc GST
AMC250+ Mixer amplifier. 250 watts. 4 x dual bal mic/line inputs. 100v, 4 ohm. 230 VAC. 2 X RU $745.00 inc GST
 

Australian Monitor AMIS60 & AMIS120

The Australian Monitor AMIS60 and AMIS120 have long been the backbone of countless commercial audio installations all over the world. With their peerless reliability, tireless performance and an extensive feature set the AMIS60 and AMIS120 have proved to be the most popular amplifiers Australian Monitor has ever produced. Now made our most popular amplifiers even more contractor friendly with the addition of two extra balanced XLR mic/dual RCA line inputs.

The AMIS60 and AMIS120 still boast the same reliability and excellent feature set including vox muting on channels 1 and 2 (defeatable), Bell, Pre Announce, Evac and Alert tones on board, Vox triggered output relay, VCA master level control, 15 VDC phantom power and mains or 24DVC operation.

AMIS60 Mixer amplifier. 60 watt. 6 x dual bal mic/line inputs. 100 & 70v, 4 & 8 ohm. 240 VAC, 24 VDC. 2 x RU $622.00 inc GST
AMIS120 Mixer amplifier. 120 watt. 6 x dual bal mic/line inputs. 100 & 70v, 4 & 8 ohm. 240 VAC, 24 VDC. 2 x RU $662.00 inc GST
 

Australian Monitor AMIS120XL

The AMIS120XL is an 8 channel, 120 watt mixer amplifier suitable for rack or desk mounting. The amplifier is a self contained compact unit of solid steel construction. This amplifier features a status LED. The amplifier may operate from mains power or 24V DC.
The AMIS120XL has eight universal input channels with separate level controls. Each channel will accept balanced or unbalanced microphone, line and auxiliary inputs. The unit has industry standard XLR microphone sockets and dual RCA auxiliary sockets for each channel. Rear panel dip switches per channel allow the adjustment of line input sensitivity.

AMIS120XL Mixer amplifier. 120 watt. 8 x dual bal mic/line inputs. 100 & 70v, 4 & 8 ohm. 240 VAC, 24 VDC. 2 x RU $928.00 inc GST
 

Australian Monitor AMIS250

The AMIS250 is a 6 channel, 250 watt mixer amplifier suitable for rack or desk mounting. The amplifier is a self contained compact unit of solid steel construction. The amplifier may operate from mains power or 24V DC.
The AMIS250 features 100 volt, 70 volt and 4 ohm isolated transformer outputs, plus a tape recorder output by means of dual RCA sockets. A balanced 700mV XLR output is also provided to feed up to 6 power amplifiers.

AMIS250 Mixer amplifier. 250 watt. 6 x dual balanced mic/line inputs. 100 & 70v, 4 ohm. 240 VAC, 24 VDC. 2 x RU $1,235.00 inc GST
 

Australian Monitor AMC+ MIX

The AMC+ MIX is a 1 RU mixer that features four universal mic/line inputs and phantom power. Master volume and overall treble and bass controls are provided, along with vox triggered muting (defeatable) giving channel 1 priority over channels 2, 3 and 4.
There is also facility to add an optional on board tone generator card.

The AMC+ MIX gives the contractor a low cost alternative in applications that are price sensitive but still require reliability and a high level of sound reproduction.

• 4 Mic/line input mono mixer
• Master Volume, overall Treble & bass controls
• 1 RU
• Optional Tone generator
• On board priority
• 12VDC Phantom Power

AMC+ MIX 4 balanced mic/line input Mono Mixer. 1 RU $224.00 inc GST
 

6 input mono mixer
XLR input switchable between mic & line level
15dB +/- gain trim control per input
Input 1 is switchable to be pre/post master
24VDC or mains power operation
Optional remote VCA/Tone generator/Muting boards available
Whisper quiet operation
Dual colour signal present indication LED per input.

MX61 Mixer. 6 dual balanced mic/line inputs. 240 VAC, 24 VDC. 1 RU $390.00 inc GST
 

8 input mono mixer
XLR input switchable between mic and line level
15dB +/- gain trim control per input
Input 1 is switchable to be pre/post master
24VDC or mains power operation
Optional remote VCA/Tone generator/Muting boards available
Whisper quiet operation
Dual colour signal present indication LED per input

MX81 Mixer. 8ch. with 6 line/active bal mic inputs & 2 mic-only inputs. 240VAC, 24 VDC. 1 RU $591.00 inc GST
 

Australian Monitor MX82

The MX82 offers high quality audio performance and a wide array of features in a standard 1RU size. There are four mic/line inputs and four stereo inputs. Each of the four mic/line channels consists of a balanced XLR input switchable between mic and line level, 15dB of gain trim across the mic/line inputs plus individually switchable phantom power (15VDC). The first 4 channels also feature a line level direct output which can be used to feed additional amplifiers, mixers or recording devices. An internal dip switch allows the first 4 inputs to be routed to the direct output, the master outputs or both. You can also feed the optional tone generator to the direct outs if required. Input 1 can also be pre or post master if you require, allowing it to be used as a priority (or emergency) input. Inputs 5-8 are four dedicated stereo RCA aux/line level inputs.

4 XLR inputs switchable between mic and line level, each with direct output
4 stereo dual RCA line level inputs.
Each input has front panel mic/line switching (inputs1-4), treble and bass control,
+/-15dB of gain trim and dual colour status LED indication
Single master volume control
Headphone output (can be pre/post master)
Phantom power individually switchable for XLR inputs
Priority muting via optional muting modules
Optional remote VCA master and tone board

MX82 Mixer. 8 chnl stereo mic/line, direct outs. 4 mic/line & 4 stereo line inputs. 240 VAC, 24 VDC. 1 RU $800.00 inc GST

Australian Monitor MX883

The MX883 is the latest MX mixer addition and is the most versatile and fully featured mixer in the MX mixer family. The MX883 is a 2RU stereo mixer that features 8 stereo RCA or mono XLR balanced inputs. Each input offers individually switchable phantom power, +/-15dB of gain trim, balanced XLR switchable between mic and line level, stereo RCA in. It also has line level direct outputs which can be used to feed additional amplifi ers, mixers or recording devices, dual colour status LED indication, treble and bass controls and individual left, right and aux assign switching with LED indication. The MX883 also features a link bus, allowing two MX883’s to be linked to form a 16 channel stereo mixer.

Designed to be a high performance stereo mixer with a separate auxiliary output bus for added fl exibility, the left and right bus outputs feature 5 band constant Q graphic EQ and all outputs have 4 stage LED level indication. The MX883 also has a pre/post master switchable headphone output. The MX883 is equally at home in a commercial installation or in the demanding environment of live performance.

8 x XLR mic/line, and stereo RCA inputs with LED status indication
Treble and Bass controls per channel
Left, Right and Aux assignment per channel
Stereo output Auxiliary bus (third output)
5 band constant Q graphic EQ on Left/Right outputs
Direct output (TRS) per channel
15dB gain trim per input
Link Bus to expand the MX883
Low noise/high performance for live sound and critical applications

MX883 8 channel stereo mixer. 8 stereo or XLR balanced inputs. 2RU. $1,358.00 inc GST

Australian Monitor PA Booster Amplifiers

Australian Monitor AMC120P Power Amplifier - 120 Watts
Australian Monitor AMC250P Power Amplifier - 250 Watts

The Australian Monitor Installation Series AMC+ range of power amplifiers take the rugged reliability of the famous AMIS range and deliver the same high quality audio reinforcement, in a low cost, 2 rack unit package. The AMC+ power amplifiers are available in 120 and 250 watts and offer 70 volt, 100 volt or 4 ohm outputs. The AMC+ series booster amplifiers give the audio contractor a reliable, low cost booster amplifier for applications that are price sensitive but still require high quality commercial sound reinforcement.

120watt or 250 watt versions.
2 RU • 4 ohm or 100 volt output
Rear panel volume control
Balanced input and thru out
Fan cooling on the AMC+ 250P

AMC120P Power amplifier. 120 watt. 100 & 70v, 4 & 8 ohm. 240 VAC,2 x RU $499.00 inc GST
AMC250P Power amplifier. 250 watt. 100 & 70v, 4 & 8 ohm. 240 VAC, 2 x RU $795.00 inc GST

Australian Monitor AMIS120P Power Amplifier - 120 Watts

Balanced XLR line level input with parallel output
signal Present LED
Rear panel level control
Temperature Sensing Fan Cooling
Current limiting protection
100V, 70V, 4 and 8 ohm outputs
2RU
240VAC/24VDC operation

AMIS120P Power amplifier. 120 watt. 100 & 70v, 4 & 8 ohm. 240 VAC, 24 VDC. 2 x RU $496.00 inc GST
 

Balanced XLR line level input with parallel output
signal Present LED
Rear panel level control
Temperature Sensing Fan Cooling
Auto limiting protection
100V, 70V and 8 ohm outputs
2RU
240VAC/24VDC operation

AMIS250P Power amplifier. 250 watt. 100 & 70v, 8 ohm. 240 VAC, 24 VDC. 2 x RU $828.00 inc GST
 

240VAC/24VDC operation
Balanced XLR input with parallel output
Overload and overdrive protection
Fan cooling with auto temperature sensing
Built-in emergency trickle charge circuitry
Transformer balanced XLR input and output
Output level 10 stage LEDs
100V, 70V and 4 ohm outputs
2RU

DCM500 Power amplifier. 500 watt. 100 & 70v, 4 ohm. 240 VAC, 24 VDC. 2 x RU $1,459.00 inc GST
 

Balanced XLR line level input with parallel output per channel
Signal Present LED
Rear panel level controls
Current limiting protection
100V, 70V, 4 and 8 ohm outputs per amplifier
2RU
240VAC/24VDC operation

AMIS1202P Power amplifier. 2 x 120 watt. 100 & 70v, 4 & 8 ohm. 240 VAC, 24 VDC. 2 x RU $1,012.00 inc GST
 

4 x 80 watts @ 4ohm, 70 volt, 100 volt.
2 RU chassis
Bi colour status LED per channel
Thermal fault LED
2 x dual speed fans
230/240 VAC or 24 VDC operation
Ground lift switches per channel
Balanced XLR line inputs
Input link through switching

AMIS480P Power amplifier. 4 x 80 watts. 100 & 70v, 4 ohm. 230 VAC, 24 VDC $1,655.00 inc GST