DIGAM - D Series
The evolution of DIGAM technology for a wide range of 2 channels uses
DIGAM D Series offer various
power ratings in 3 models ranging from 2 x 600 watts/ch. @ 4 Ohm to 2 x
2000 watts/ch. @ 2 Ohm, still maintaining the 1 unit size.
This series, in similar way to the corresponding Q series, is particularly
suitable to be used either for stand alone medium/small installations
either in large and distributed systems tanks to the capability of
advanced remote control and monitoring features suitable to manage up to
100 amps.
The D series represents a further flexible and cost effective approach
from stand alone use to large systems, allowing in various system
configurations to reduce the total number of equipments.
Features:
Advanced switch-mode worldwide operating power supply technology for high
performance and compact size
Power Factor Correction PFC for extremely low mains consumption and wide
mains operating range
Variable speed fan for low noise
Low Inrush Limiting reduces AC inrush current, removing the need for
expensive power sequencers
XLR female / 6.3mm Jack Neutrik style input connectors with link
capability
Built-in Clip limiters
Detented gain controls for fast and accurate gain settings
Comprehensive front panel indicators including signal, clip, protect and
thermal forecast
Fully protected circuitry design including DC, infrasonic, high frequency,
thermal overload and short circuit
Fixed frequency switchmode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - all models only 8.5 kg (18 pounds) for easier racking and
shipping
Remote Control Option ( RS 485 interface )
Protections circuitry:
DC protection: protects against infrasonic signals
VHF protection: protects the loudspeakers against strong very high
frequency non-musical signals above the audible range.
Thermal protection: prevents the amplifier from being overheated. The
protection indicators on the front panel are switched on, as a warning,
before the protection process is initiated.
AC protection: shuts down the power supply if the line voltage is outside
the operating voltage.
Clip limiter: prevents severely clipped waveforms from reaching the
loudspeakers, whilst maintaining full peak power.
PWS-D2002 2 channel, Digital, power audio amplifier. Power Factor Correction, under 10Kgs, 1RU. 1,000W/ch @ 2W, 600W/ch @ 4W, 350W/ch @ 8W. $2,450.00 inc GST
PWS-D2002R D2002 fitted with D-Kit Remote Management Card $2,696.00 inc GST
PWS-D3002 2 channel, Digital, power audio amplifier. Power Factor Correction, under 10Kgs, 1RU. 1,500W/ch @ 2W, 830W/ch @ 4W, 450W/ch @ 8W. $2,859.00 inc GST
PWS-D3002R D3002 fitted with D-Kit Remote Management Card $3,105.00 inc GST
PWS-D4002 2 channel, Digital, power audio amplifier. Power Factor Correction, under 10Kgs, 1RU. 2,000W/ch @ 2W, 1,100W/ch @ 4W, 550W/ch @ 8W. $3,269.00 inc GST
PWS-D4002R D4002 fitted with D-Kit Remote Management Card $3,514.00 inc GST
DIGAM - Q Series
The evolution of DIGAM technology for a wide range of 4 channels uses
DIGAM Q Series offer various
power ratings in 5 models ranging from 4 x 400 watts/ch. @ 4 Ohm to 4 x
1250 watts/ch. @ 2 Ohm, still maintaining the 1 unit size.
This series, in similar way to the corresponding D series, is particulary
suitable to be used either for stand alone medium/small installations
either in large and distributed systems tanks to the capability of
advanced remote control and monitoring features suitable to manage up to
100 amps.
The Q series represents a further flexible and cost effective approach
from stand alone use to large systems, allowing in various system
configurations to reduce the total number of equipments.
Features:
Advanced switch-mode worldwide operating power supply technology for high
performance and compact size
Power Factor Correction PFC for extremely low mains consumption and wide
mains operating range
Variable speed fan for low noise
Low Inrush Limiting reduces AC inrush current, removing the need for
expensive power sequencers
XLR female / 6.3mm Jack Neutrik style input connectors with link
capability
Built-in Clip limiters
Detented gain controls for fast and accurate gain settings
Comprehensive front panel indicators including signal, clip, protect and
thermal forecast
Fully protected circuitry design including DC, infrasonic, high frequency,
thermal overload and short circuit
Fixed frequency switchmode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - all models only 10 kg (22 pounds) for easier racking and
shipping
Remote Control Option ( RS 485 interface )
Protections circuitry
DC protection: protects against infrasonic signals and output stage
fault
VHF protection: protects the loudspeakers against strong very high
frequency non-musical signals above the audible range.
Thermal protection: prevents the amplifier from being overheated. The
protection indicators on the front panel are switched on, as a warning,
before the protection process is initiated.
AC protection: shuts down the power supply if the line voltage is outside
the operating voltage.
Clip limiter: prevents severely clipped waveforms from reaching the
loudspeakers, whilst maintaining full peak power.
PWS-Q3002 4 channel, Digital, power audio amplifier. Power Factor Correction, under 10Kgs, 1RU. 750W/ch @ 2W, 400W/ch @ 4W, 250W/ch @ 8W. $3,616.00 inc GST
PWS-Q3002R Q3002 fitted with Q-Kit Remote Management Card $3,943.00 inc GST
PWS-Q4002 4 channel, Digital, power audio amplifier. Power Factor Correction, under 10Kgs, 1RU. 1,000W/ch @ 2W, 600W/ch @ 4W, 350W/ch @ 8W. $4,025.00 inc GST
PWS-Q4002R Q4002 fitted with Q-Kit Remote Management Card $4,353.00 inc GST
PWS-Q4004 4 channel, Digital, power audio amplifier. Power Factor Correction, under 10Kgs, 1RU. 1,000W/ch @ 4W, 600W/ch @ 8W. $4,434.00 inc GST
PWS-Q4004R Q4004 fitted with Q-Kit Remote Management Card $4,762.00 inc GST
DIGAM - M Series
The M Series represents a superb value from a premium brand with unparalleled efficiency, good for the environment and easy on the power bill. The size and weight is an absolute minimum thanks to the 1 U standard and the reduced depth of the equipment.
M Series models are provided in two versions, M50Q and M28Q (four channels) and M30D, M20D and M14D (two channels).
The two four channels models provide up to 1250W/ch on 4 ohm, while the three two channels models offer a maximum output of 1500W/ch on 4 ohm, while full range can reach up to 360W/ch on 8 ohm.
The M Series provides Optional DSP modules hidden inside to prevent tampering with system settings.
The M Series maintains the high professional class from small to medium applications of installed sound, stage monitors and portable sound.
Features:
- Advanced switch-mode power supply technology for high performance and compact size
- Fixed frequency switch mode output
- Patented output filter with ripple cancellation network
- Neutrik XLR balanced inputs with loop thru XLR and Speakon outputs connectors
- Fully protected circuit design with:
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Thermal protection: when output devices reach 75 °C (167 °F) amplifier shut down outputs, they will unmute automatically when temperature will reach 65 °C (149 °F)
- Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output.
- Temperature controlled continous variable speed fan, front to back airflow
- Dual 24-bit A/D & D/A with high dynamic range (114 dB(A)), 56 bit for internal processing and 1 ms fixed latency; separate input/output EQ's with numerous filters of various types up to 48 dB/oct; peak, RMS, and frequency dependent limiters, time alignment*
- Recessed stepped attenuators
- Modular construction
- Full three year warranty
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - all models only 7.4 kg (16 pounds) for easier racking and shipping
PWS-M14D 2 channel, Digital, power audio amplifier. Under 8Kgs, 1RU. 700W/ch @ 4W, 360W/ch @ 8W. $2,164.00 inc GST
PWS-M20D 2 channel, Digital, power audio amplifier. Under 8Kgs, 1RU. 1,800W/ch @ 2Ω, 1,000W/ch @ 4W, 600W/ch @ 8W. $2,491.00 inc GST
PWS-M30D 2 channel, Digital, power audio amplifier. Under 8Kgs, 1RU. 2,700W/ch @ 2Ω, 1,500W/ch @ 4W, 900W/ch @ 8W. $3,064.00 inc GST
PWS-M28Q 4 channel, Digital, power audio amplifier. Under 8Kgs, 1RU. 750W/ch @ 4W, 350W/ch @ 8W. $3,207.00 inc GST
PWS-M50Q 4 channel, Digital, power audio amplifier. Under 8Kgs, 1RU. 1,250W/ch @ 4W, 750W/ch @ 8W. $4,025.00 inc GST
DIGAM - K Series
DIGAM K Series offer various power ratings
in 5 models ranging from 2 x 2500 watts/ch. @ 4 Ohm to 2 x 9000 watts/ch.
@ 2 Ohm, still maintaining the 1 unit size.
DIGAM K Series has become the flagship of Powersoft's technologies,
ranking in the "Top Class" amplification of the global pro audio market.
DIGAM K series represents a new milestone of switch mode amplification
providing incredible power in 1 rack unit with the lowest weight and
highest efficiency.
DIGAM K sonic performances set a new target for professional audio market.
See also the new K-Series web site:
www.k-series.it
Features
Advanced switch-mode worldwide operating power supply technology for high
performance and compact size
Power Factor Correction PFC for extremely low mains consumption and
extremely wide mains operating range
Variable speed fan for low noise
Low Inrush Limiting reduces AC inrush current, removing the need for
expensive power sequencers
XLR female / 6.3mm Jack Neutrik style input connectors with link
capability
Built-in defeatable Clip limiters for each channel
LCD matrix interactive display
Digital gain-attenuator control
User selectable maximum output power for each channel
User selectable maximum mains current draw
Comprehensive-user friendly front panel display menu
Fully protected circuitry design including DC, infrasonic, high frequency,
thermal overload and short circuit
Temperature forecast with LCD traced historical behaviour
Downloadable log file of functional fault events with time related trace
Load impedance measurement / display for each channel
Output power measurements / display for each channel
Mains voltage and current measurements / display
Defeatable gate selection for each channel
Gain/sensitivity user selection capability
Hardware monitor available for fast local diagnostic
Fixed frequency switchmode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - all models only 12 kg (26 pounds) for easier racking and
shipping
Built in Remote Control ( RS 485 interface ) for full diagnostic,
operational setting and system monitoring
Smart Card settings , parameters and upgrades functionality
Lockable set-up by user selectable access key code
DSP option capability
Ethernet option capability
Protections circuitry
DC protection: protects against infrasonic signals
VHF protection: protects the loudspeakers against strong very high
frequency non-musical signals above the audible range.
Thermal protection: prevents the amplifier from being overheated. The
protection indicators on the front panel are switched on, as a warning,
before the protection process is initiated.
AC protection: shuts down the power supply if the line voltage is outside
the operating voltage.
Clip limiter: prevents severely clipped waveforms from reaching the
loudspeakers, whilst maintaining full peak power.
PWS-K2 2 channel, Digital, high power audio amplifier. Power Factor Correction, 12Kgs, 1RU. 2,400W/ch @ 2W, 1,950W/ch @ 4W, 1,000W/ch @ 8W. $4,373.00 inc GST
PWS-K3 2 channel, Digital, high power audio amplifier. Power Factor Correction, 12Kgs, 1RU. 2,800W/ch @ 2W, 2,600W/ch @ 4W, 1,400W/ch @ 8W. $5,232.00 inc GST
PWS-K6 2 channel, Digital, high power audio amplifier. Power Factor Correction, 12Kgs, 1RU. 3,600W/ch @ 2W, 2,500W/ch @ 4W, 1,300W/ch @ 8W. $6,459.00 inc GST
PWS-K8 2 channel, Digital, high power audio amplifier. Power Factor Correction, 12Kgs, 1RU. 4,800W/ch @ 2W, 3,000W/ch @ 4W, 1,500W/ch @ 8W. $7,523.00 inc GST
PWS-K10 2 channel, Digital, high power audio amplifier. Power Factor Correction, 12Kgs, 1RU. 6,000W/ch @ 2W, 4,000W/ch @ 4W, 2,000W/ch @ 8W. $8,750.00 inc GST
PWS-K20 2 channel, Digital, high power audio amplifier. Power Factor Correction, 12Kgs, 1RU. 9,000W/ch @ 2W, 5,200W/ch @ 4W, 2,700W/ch @ 8W. $10,386.00 inc GST
K Series Options & Accessories
PWS-Step-up Card Step up card for Power Upgrading for K2>K3, K6>K8, K8>K10, per step $1,337.00 inc GST
PWS-KDSP-Board KDSP Board, (User Installed) $1,010.00 inc GST
PWS-KAESOP-Board KAESOP Board, 4 Ports, 2 Front only (User Installed) $723.00 inc GST
KAESOP Board, 4 Ports, 2 Front/2 Rear (User Installed) $662.00 inc GST
PWS-Smart-Card K Series Preset Storage Smart Card $85.00 inc GST
PWS-PowerControlHub 16 ports PowerControlHub Unit $1,694.00 inc GST