Q Tech QTA-6000 Series Mixer Amplifiers
The Q-Tech Range of Mixer amplifiers are of very high quality and come supplied full of features.
- In built chime tone module
- Phantom Power on all mic inputs
- Telepaging input with selectable priority
- 24v DC power inputs
- Built in Mic/Line Priority
- Low Signal to Noise ratio
- Complete with barrier strip, XLR or ¼ in jack Mic input connections
- Pre Out function
- Tape Output
- External Mixer input
- All Mic inputs selectable as Mic or Line
- The Mixer amps can also drive up to three external power amps
Mains Voltage: AC 115V/ 240V,
Battery Voltage: DC 24V (MAX 10% deviation)
Outputs:
Speaker outputs: 4 & 8ohm, 70V, 100V,
Inputs:
Mic 1~5: 1mV, 600_ balanced.
Aux 1~6: 150mV, dual RCA stereo to mono converter 22K,
TEL: 150mV,
Total harmonic distortion Less than 1% @ 1KHz, rated power
Tone Controls Bass : ± 10dB at 100Hz, Treble : ± 10dB at 10KHz
Controls:
Channel 1~5 volume control, Aux 6 volume control, Master volume control
Tone controls (Bass, Treble),
TEL volume control, Mute slide switch
Mic 1/Aux 1 push switch, Mic 2/Aux 2 push switch, Mic 3/Aux 3
push switch,
Mic 4/Aux 4 push switch, Mic 5/Aux 5 push switch, Chime Control
AC 115V / 240V voltage
Selector switch
Phantom power Factory set “off” @ 16V, defeatable via internal jumpers
Priority TEL mutes all channels, Channel 1 can mute Channel 3 ~5, Aux 3~6
Dimensions (HxWxD)mm 88mm(H) x 426mm(W) x 13
Mounting options Table top or 19” rack mountable / Rack Mount Ears Included
QTA-6060M 60 Watt Mixer Amplifier $575.00 inc GST
QTA-6120M 120 Watt Mixer Amplifier $610.00 inc GST
QTA-6250M 250 Watt Mixer Amplifier $860.00 inc GST
|
Q Tech QTM-60P Pre Amplifier
The QTM-60P Mixer is full featured very high quality mixer.
• 11 inputs
• 5 mic inputs with selectable phantom power
• CD Input
• Tuner Input
• Chime input
• 3 auxiliary inputs
• Record out
• Built in muting circuit
• 3 levels of priority
• 24v DC terminals for external power source
• Input signal/Clip: LEDS on each input
Product Specifications:
| Input Sensitivity/Impedance |
| MIC 1-5 |
0.4mV @600Ω, Balanced |
| CD |
300mV @47KΩ, Unbalanced |
| TUNER |
100mV @50KΩ,Unbalanced |
| AUX |
100mV @50KΩ,Unbalanced |
| CHIME |
700mV @10KΩ,Unbalanced |
| Output Level/Impedance |
| Line Out |
1.2V @600Ω, Balanced |
| Recording Out |
1V @600Ω, Unbalanced |
| Freq. Response |
50HZ~20KHZ |
| T.H.D(at 1kHz, rated output) |
1% @ 1KHZ |
| Signal to Noise ratio |
65 dB |
| Tone Control |
Bass 100HZ +/- 12 dbTreble 10KHZ +/- 12 dB |
| Power Source |
AC 115V/240V 50/60HZ, DC24V |
| Power Consumption |
AC 9.5W @ Rated PowerDC 1A @ Rated Power |
| Weight |
4kgs |
| Dimensions (mm) |
44(H) x 483 (W) x 290(D) |
| Mounting |
19”RACK |
QTM-60P Pre-Amp Mixer $549.00 inc GST
|
| Q Tech QTA-1120P & QTA-1240P Power Amplifiers
Everyone says an amplifier is an amplifier; however, we have looked at the needs of the Contractor and offer something a little different.
- Easy to use booster Amplifier
- 7 step LED Ramp for signal presence
- XLR and phone jack input
- Rear mounted Input gain control
- Parallel/Mono selection for the use of additional power amplifiers
- Rear mounted switch for selection of 100mV or 1v sensitivity
- 8 ohm, 70V and 100V speaker output
- XLR and phone jack output
- Overload, over temperature, and speaker short protection.
- 115v-240v AC and 24v DC power in
- 2U height
- 19" rack or table mounted Rack ears supplied.
- 3 year replacement warranty.
QTA1120P Mono Booster Amplifier 120W $477.00 inc GST
QTA1240P Mono Booster Amplifier 240W $720.00 inc GST
|
Q Tech QTA-1360P & QTA-1480P Power Amplifiers
- Easy to use booster Amplifier
- 7 step LED Ramp for signal presence
- XLR and phone jack input
- Rear mounted Input gain control
- Parallel/Mono selection for the use of additional power amplifiers
- Rear mounted switch for selection of 100mV or 1v sensitivity
- 8 ohm, 70V and 100V speaker output
- XLR and phone jack output
- Overload, over temperature, and speaker short protection.
- 115v-240v AC and 24v DC power in
- 3U height
- 19" rack or table mounted Rack ears supplied.
- 3 year replacement warranty.
QTA1360P Mono Booster Amplifier 360W $1,099.00 inc GST
QTA1480P Mono Booster Amplifier 480W $1,178.00 inc GST
|
Q Tech QTA-2120P & QTA-2240P Dual Channel Power Amplifiers
The QTA-2120P & QTA-2240P are 2 channel power amplifiers designed for 2 zone applications. Each channel has XLR and phone jack input and outputs, each with its own gain control
- 2 channels Power Amplifier
- 7 step LED ramp for signal presence
- Individual gain control of each input
- Parallel/Mono selection for the use of additional power amplifiers
- 8 ohm, 70V and 100V speaker output
- Choice of XLR and phone jack outputs
- Overload, over temperature, and speaker short protection.
- 115v-240v AC and 24v DC power in
- 2U height
- 19" rack or table mounted rack ears supplied.
- 3 year replacement warranty
QTA2120P Dual Booster Amplifier 120-120W $898.00 inc GST
QTA2240P Dual Booster Amplifier 240-240W $1,485.00 inc GST
|
Q Tech QTA-4060P & QTA-4120P Four Channel Power Amplifiers
The QTA-4060P amplifier is a 4 channel power amplifiers designed for up to 4 zones application.
- 4 channels Power Amplifier
- Signal presence/clip and protection status indicators for each individual channel
- Individual gain controls of each input
- 8 ohm, 70V and 100V speaker output
- All inputs and outputs through Phoenix connectors for easy maintenance.
- Overload, over temperature, and speaker short protection.
- 115v-240v AC and 24v DC power in
- 3U height
- 19" rack or table mounted Rack ears supplied.
- 3 year replacement warranty.
QTA4060 4ch Booster Amplifier 60-60-60-60W $1,360.00 inc GST
QTA2240P 4ch Booster Amplifier 120-120-120-120W $1,750.00 inc GST
|
