Almost Anything Audio
HOME

VISIT THE
SHOWROOM

SPECIAL
DEALS

SERVICE
 CALLS

CONTACT
 DETAILS

MANUFACTURERS
HOME SITES

Wharfedale Pro Graphic Equalisers

Back to Equalisers

 

The Q series range of graphic equalisers have been designed from the ground up to provide the most transparent tonal correction and feedback elimination possible, utilising constant Q filters to maintain even bandwidth irrespective of gain making even severe adjustments remain transparent.

There are 3 models in the range catering for 1/3 octave and 2/3 octave frequency bandwidths with ISO centre frequencies. Whatever your needs the Q series will assist you in achieving the best possible sound from your live rig or installation.

All models feature switchable 6dB / 12dB fader range and input gain ranging from -infinity dB to +6dB, in addition soft limiting helps to prevent damage to your amp and speakers. A HPF has been included remove unwanted low end and improve headroom. There is a bypass switch and LED output meter to allow easy A/B comparison and assist correct gain structure.

All models in the range are equipped with XLR / 1/4” TRS balanced / unbalanced connections and have ground lift switches to eliminate any earth loop or hum issues. Power is supplied via an IEC connector.

Q-215
Two channel Graphic equalizer

The Q-215 is a dual channel 15 band 2/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings. The Q-215 fits into a convenient 1U 19" rackmount chassis and has inputs and outputs on XLR and 1/4" TRS balanced / unbalanced connectors. Ground lift switches can eliminate any earth loop or hum issues. Power is supplied via an IEC connector. A switchable 40Hz HPF allows for removal of unwanted low end rumble that in turn increases overall system headroom.

SPECIFICATIONS:
MODEL Q-215
Power Supply
Operating Voltage 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz
Power consumption 12W
Mains Connection IEC receptacle
INPUT/ OUTPUT
Connectors 1/4" TRS, female XLR(pin 2 hot)
Input Impedance Balanced 20k ohm,unbalanced 10k ohm
Max Input Level >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm,unbalanced 50 ohm
Max Output Level >+21dBu balanced/ unbalanced
into 2k ohm or greater
SYSTEM PERFORMANCE
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Dynamic Range 108 dB
Signal-to-Noise 90 dB
THD + Noise <0.004%
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Frequency Response <10Hz to >50kHz, +0.5/-3dB
FUNCTION SWITCHES
EQ Bypass Bypasses the graphic equalizer
section in the signal path
Low Cut Activates 40Hz 12dB/oct high pass filter
Range Selects either +/- 6dB or +/-12dB slider boost/cut range
Soft limit Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier
DIMENSIONS/WEIGHT
Dimension 482.6 x 168 x 44mm
Weight 2.96 kg

Q215 Wharfedale 2 x 15 channel equaliser $299.00 inc GST

 

Q-130
Single channel Graphic equalizer

The Q-130 is a single channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.

Professional long throw slide faders with a fader range switchable from 6dB to 12dB allow for precise adjustments allowing you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-130 is housed in a 2U 19” rackmount chassis and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. A ground lift switch can eliminate earth loop or hum issues. Power is supplied via an IEC connector.

SPECIFICATIONS:
MODEL Q-130
Power Supply
Operating Voltage 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz
Power consumption 12W
Mains Connection IEC receptacle
INPUT/ OUTPUT
Connectors 1/4" TRS, female XLR(pin 2 hot)
Input Impedance Balanced 20k ohm,unbalanced 10k ohm
Max Input Level >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Type Impedance-balanced/unbalanced,RF filtered
Output Impedance Balanced 100 ohm,unbalanced 50 ohm
Max Output Level >+21dBu balanced/ unbalanced
SYSTEM PERFORMANCE
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Dynamic Range 108 dB
Signal-to-Noise 90 dB
THD + Noise <0.004%
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Frequency Response <10Hz to >50kHz, +0.5/-3dB
FUNCTION SWITCHES
EQ Bypass Bypasses the graphic equalizer
section in the signal path
Low Cut Sweepable with rotary control from 10Hz - 200Hz
Range Selects either +/- 6dB or +/-12dB slider boost/cut range
Soft limit Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier
DIMENSIONS/WEIGHT
Dimension 482.6 x 170 x 88 mm
Weight 4.0 kg

Q130 Wharfedale 1 x 30 channel equaliser $199.00 inc GST

 

Q-230
Dual channel Graphic equalizer

The Q-230 is a dual channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.

A fader range switchable from 6dB to 12dB helps you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-230 is housed in a 2U 19” rackmount chassis and and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. Ground lift switches can eliminate any earth loop or hum issues. Power is supplied via an IEC connector.

SPECIFICATIONS:
MODEL Q-230
Power Supply
Operating Voltage 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz
Power consumption 12W
Mains Connection IEC receptacle
INPUT/ OUTPUT
Connectors 1/4" TRS, female XLR(pin 2 hot)
Input Impedance Balanced 20k ohm,unbalanced 10k ohm
Max Input Level >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm,unbalanced 50 ohm
Max Output Level >+21dBu balanced/ unbalanced into 2k ohm or greater
SYSTEM PERFORMANCE
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Dynamic Range 108 dB
Signal-to-Noise 90 dB
THD + Noise <0.004%
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Frequency Response <10Hz to >50kHz, +0.5/-3dB
FUNCTION SWITCHES
EQ Bypass Bypasses the graphic equalizer section in the signal path
Low Cut Sweepable with rotary control from 20Hz – 100Hz
Range Selects either +/- 6dB or +/-12dB slider boost/cut range
Soft limit Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier
DIMENSIONS/WEIGHT
Dimension 482.6 x 168 x 88 mm
Weight 3.93 kg

Q230 Wharfedale 2 x 30 channel equaliser $399.00 inc GST

 

 
Advice is just a phone call away: 1300-888-468

More information & Quotes & Orders:
email info@anythingaudio.com.au

All prices are inclusive of GST