Titan Series
On Stage, in a Club, on the Road, or Even in Your Basement
Titan™ is the ultimate in portability, performance and styling for music, speech, and a variety of sound reinforcement applications. Built around the best components, including a titanium compression driver and heavy-duty cast-frame woofer, Titan™ delivers the high level, even dispersion and sonic integrity usually associated with much more expensive speakers. Designed to perform in portable and fixed installation applications alike, the Titan™ series offers a range of multiple mounting options.
Titan™ 8, Titan™ 12 and Titan™ 15 are the first three models available in the market. A high performance passive speaker system designed around your needs. High output, punchy low end and extended high frequency response that's equally at home with music and speech. An ultra-light-weight composite enclosure that's designed to be stand mounted, arrayed or even used as a floor monitor. Compact, lightweight and affordable, the Titan™ . Series still packs professional drivers that deliver unmatched performance. |
TITAN-8P
SPECIFICATIONS: |
| MODEL |
TITAN 8 PASSIVE |
| GENERAL INFO |
|
| System type |
Two way passive speaker system |
| Frequency response +/- 3db |
70Hz-20kHz |
| Sensitivity (db 1w@1m) |
96dB SPL |
| System impedance |
8 ohms |
| Maximum SPL Peak dB |
124dB SPL Peak |
| POWER HANDLING (Watts) |
|
| Continuous RMS |
150W |
| Program |
300W |
| Peak |
600W |
| LF DRIVER |
|
| Lf driver size mm / inches |
205mm / 8 ", Die-cast aluminium frame |
| Lf voice coil size |
38.86mm / 1.53 " |
| HF SECTION |
|
| Hf voice coil size |
30mm / 1.2 " |
| Hf type |
Compression Driver |
| Hf diaphragm material |
Cloth |
| Horn dispersion (H x V) |
90° x 60° averaged 2kHz to 10kHz |
| Hf exit size mm / inches |
25mm / 1 " |
| CROSSOVER SECTION |
|
| Crossover Frequency / Filter |
2.4kHz, 12dB per octave |
| Hf driver protection |
Bulb |
| PHYSICAL FEATURES |
|
| Finish |
Black |
| Construction material |
Injection Molded Polypropylene |
| Handle quantity |
1 built-in carry handle |
| Suspension points |
8 M6 threaded inserts including 4 M6 threaded inserts on bottom in OmniMount 60.0-type footprint |
| Stand adapter - BOTTOM |
Pole-mount receptacle with lock screw, Optional wall-mount bracket |
| IN / OUT PANEL (speaker Level) |
|
| Input connector |
NL4 Speakon ™ type x2 " 1/4" phone jack x 2 (All wired in parallel) |
| DIMENSIONS & WEIGHT |
|
| Height ( mm / ins ) |
396mm / 15.59 " |
| Width Front / Rear / mm / ins |
266mm / 10.47 " |
| Depth ( mm / ins ) |
221mm / 8.7 " |
| Net weight ( kg / lbs ) |
5.5kg / 12.1 lbs |
| Gross weight ( kg / lbs ) |
7.5kg / 16.5 lbs |
|
TITAN8P Passive 8'' 150W RMS, Black 2-Way ABS Moulded Speaker $249.00 each inc GST
TITAN8BAG Bag for Titan 8 $59.00 inc GST
TITAN8WBB Titan 8 Wall mount bracket $49.00 inc GST
|
| TITAN-12P
SPECIFICATIONS: |
| MODEL |
TITAN 12 PASSIVE |
| GENERAL INFO |
|
| System type |
12" 2-way passive |
| Frequency response +/- 3db |
55-20kHz |
| Sensitivity (db 1w@1m) |
98dB |
| System impedance |
8 ohms |
| Maximum SPL Peak dB |
128dB |
| POWER HANDLING (Watts) |
|
| Continuous RMS |
250 |
| Program |
500 |
| Peak |
1000 |
| LF DRIVER |
|
| Lf driver size mm / inches |
1x12" |
| Lf voice coil size |
64.26mm/2.5" |
| HF SECTION |
|
| Hf voice coil size |
44mm/1.75" |
| Hf type |
Compression Driver |
| Hf diaphragm material |
Titanium |
| Horn dispersion (H x V) |
90 x 60 |
| Hf exit size mm / inches |
25mm/1" |
| Hf horn shape |
EWG™ - Elliptical Waveguide |
| Hf peak indicator |
Peak LED ring in horn throat |
| CROSSOVER SECTION |
Type: 2-way |
| Crossover Frequency / Filter |
2.4 kHz / Linkwitz-Riley |
| Hf driver protection |
DTF™ - 175 Dynamic Thermal Filament |
| Hf EQ (Boost / Flat) |
3dB boost (long-throw) / Flat (near-field) |
| PHYSICAL FEATURES |
|
| Finish |
Black |
| Handle quantity |
2 carry handles (one on each side) |
| Suspension points |
(10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint |
| Stand adapter - BOTTOM |
Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket |
| Stand adapter - TOP |
Optional dual-unit array speaker stand hardware |
| Enclosure type |
Molded Polypropylene |
| Enclosure shape |
Trapezoidal for vertical array and horizontal stage monitor applications |
| IN / OUT PANEL (speaker Level) |
|
| Input connector |
2 x 1/4" jacks and2 x Speakon™ |
| DIMENSIONS & WEIGHT |
|
| Height ( mm / ins ) |
556mm/21.88" |
| Width Front / Rear / mm / ins |
384mm/15.1" / 180mm/7.1" |
| Depth ( mm / ins ) |
312mm/12.3" |
| Net weight ( kg / lbs ) |
12kg/26.4lbs |
| Gross weight ( kg / lbs ) |
14kg/30.8lbs |
|
TITAN12P Passive 12'' 250W RMS, Black 2-Way ABS Moulded Speaker $349.00 inc GST
TITAN12BAG Bag for Titan 12 $59.00 inc GST
TITANWBB Titan 12 or 15 Wall mount bracket Black $75.00 inc GST
TITANWBW Titan 12 or 15 Wall mount bracket White $75.00 inc GST
|
| TITAN-15P
SPECIFICATIONS: |
| MODEL |
TITAN 15 PASSIVE |
| GENERAL INFO |
|
| System type |
15" 2-way passive |
| Frequency response +/- 3db |
50-18kHz |
| Sensitivity (db 1w@1m) |
97dB |
| System impedance |
8 ohms |
| Maximum SPL Peak dB |
129dB |
| POWER HANDLING (Watts) |
|
| Continuous RMS |
400 |
| Program |
800 |
| Peak |
1600 |
| LF DRIVER |
|
| Lf driver size mm / inches |
1x15" |
| Lf voice coil size |
75mm/3" |
| HF SECTION |
|
| Hf voice coil size |
51mm/2" |
| Hf type |
Compression Driver |
| Hf diaphragm material |
Titanium |
| Horn dispersion (H x V) |
90 x 60 |
| Hf exit size mm / inches |
25mm/1" |
| Hf horn shape |
EWG™ - Elliptical Waveguide |
| Hf peak indicator |
Peak LED ring in horn throat |
| CROSSOVER SECTION |
2-way |
| Crossover Frequency / Filter |
1.8kHz / 12dB per oct. |
| Hf driver protection |
DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) |
| PHYSICAL FEATURES |
|
| Finish |
Black |
| Handle quantity |
2 carry handles (one on each side) |
| Suspension points |
(10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint |
| Stand adapter - BOTTOM |
Pole-mount receptacle with lock screw, Optional wall-mount bracket |
| Enclosure type |
Molded Polypropylene |
| Enclosure shape |
Trapezoidal for vertical array and horizontal stage monitor applications |
| IN / OUT PANEL (speaker Level) |
|
| Input connector |
2 x Speakon™ |
| DIMENSIONS & WEIGHT |
|
| Height ( mm / ins ) |
708mm/27.9" |
| Width Front / Rear / mm / ins |
477.8mm/18.8" |
| Depth ( mm / ins ) |
401.77mm/15.8" |
| Net weight ( kg / lbs ) |
22kg/48.4 lbs |
| Gross weight ( kg / lbs ) |
25kg/55 lbs |
|
TITAN15P Passive 15'' 400W RMS, Black 2-Way ABS Moulded Speaker $549.00 inc GST
TITAN15BAG Bag for Titan 15 $99.00 inc GST
TITANWBB Titan 12 or 15 Wall mount bracket Black $75.00 inc GST
TITANWBW Titan 12 or 15 Wall mount bracket White $75.00 inc GST
|
TITAN ACTIVE TWO-WAY, ACTIVE PROFESSIONAL LOUDSPEAKER
Wharfedale Pro has taken the power and reliability of our innovative Titan models and combined it with on board bi-amplification and active crossovers to make the brand new stunning TITAN™ ACTIVE. Built with the same rugged, injection molded chassis as our Titan Passive series, these powerhouses are at home almost anywhere, band practice, on stage, in studios, at rehearsals, theaters, even houses of worship. |
TITAN-8A Mk2
Built in 2 channel mixer with microphone and line level inputs
Balanced XLR line output for for connections to subwoofers or daisy-chaining units together
2 band EQ
SPECIFICATIONS: |
| MODEL |
TITAN 8 ACTIVE MKII |
| GENERAL INFO |
|
| System type |
Active 8” 2-way Bi-Amplified system |
| Frequency response +/- 3db |
70-20kHz |
| AC Power details |
|
| Power Supply |
High Efficiency Switching Mode Power Supply |
| AC Power Options |
AC100~240V, 50 / 60Hz |
| Power On Indicator |
LED |
| Rigging / Bracket / |
8 M6 threaded inserts including 4 M6 threaded |
| Mounting Options |
inserts on bottom in OmniMount 30.0-type footprint Pole-mount receptacle with lock screw 1 carry handles ( on each side) Optional wall-mount bracket |
| Line Output |
|
| Line Output Connector |
Switchable LOOP / MIX Balanced Male XLR Connector |
| Sensitivity |
0dBu (-2.2dBv or 0.775Vrms) |
| Impedance Balanced: |
Balanced: 1k ohm – Unbalanced: 500 ohm |
| Input A - type |
Switchable balanced mic or line level input |
| Input Sensitivity |
Mic: -47dBu (-49.2dBv or 3.4mVrms) Line: 0dBu (-2.2dBv or 0.775Vrms) |
| Maximum Input Level |
+22dBu |
| Input Connector |
XLR / ?” Combo jack |
| Input Impedance |
Balanced: 20kΩ - Unbalanced: 10kΩ |
| Input B - type |
|
| Maximum Input Level |
+22dBu |
| Input Connectors |
Combo jack: 1/4" - XLR |
| Bass Response Optimizer |
|
| Subsonic Filter |
30Hz, Second-order filter |
| Amplifiers |
|
| Low-Frequency Power Amplifier (Class D) |
Rated 150W RMS, 300W Peak |
| High- Frequency Power Amplifier (Class D) |
Rated 30W RMS, 60W Peak |
| Electronic Crossover: |
24dB per octave Linkwitz-Riley |
| Crossover Frequency |
2.4kHz |
| DIMENSIONS & WEIGHT |
|
| Net weight ( kg / lbs ) |
6.25kg / 13.75lbs |
| Gross weight ( kg / lbs ) |
8.15kg/ 17.93lbs |
| Low Frequency Transducer |
|
| Size (mm / inches) |
205mm / 8” |
| Coil Size (mm / inches) |
38.86mm / 1.53” |
| Impedance |
4 Ω |
| High Frequency Transducer |
|
| Type |
Compression Driver |
|
TITAN8A-mk2 Active Black 180W 8" 2-Way ABS Moulded Speaker $449.00 each inc GST
TITAN8BAG Bag for Titan 8 $59.00 each inc GST
TITAN8WBB Titan 8 Wall mount bracket $49.00 each inc GST
|
| TITAN-12D
Built in 2 channel mixer with microphone and line level inputs
Balanced XLR line output for for connections to subwoofers or daisy-chaining units together
2 band EQ
SPECIFICATIONS: |
| MODEL |
TITAN 12 ACTIVE |
| GENERAL INFO |
|
| System type |
Active 12" 2-way Bi-Amplified system |
| Frequency response +/- 3db |
55-20kHz |
| LF DRIVER |
|
| Lf driver size mm / inches |
305mm / 12" 4 ohm |
| Lf voice coil size |
64.26mm / 2.5" |
| HF SECTION |
|
| Hf voice coil size |
51mm / 2" 8 ohm |
| Hf type |
Compression Driver |
| Hf diaphragm material |
Titanium |
| Horn dispersion (H x V) |
90 x 60 |
| Hf exit size mm / inches |
25mm / 1" |
| Hf horn shape |
EWG™ - Elliptical Waveguide |
| CROSSOVER SECTION |
|
| Crossover Frequency / Filter |
2.3kHz, 24dB per octave Linkwitz-Riley |
| Hf driver protection |
Independent LF and HF limiters |
| PHYSICAL FEATURES |
|
| Finish |
Black |
| Handle quantity |
2 carry handles (one on each side) |
| Suspension points |
(10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint |
| Stand adapter - BOTTOM |
Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket |
| Enclosure type |
Molded Polypropylene |
| AMPLIFIER POWER |
|
| Continous RMS |
LF 250W, HF 50W |
| Peak (Wats) |
LF 500W, HF 100W |
| ProtectionType |
Power switch on / off mute, Thermal Amplifier shutdown/auto reset, Low line voltage shut down at 60% nominal line voltage, DC Protection, Short protection, Clip limiter turns on approx at 250W with red LED indicator |
| Power on indicator |
LED |
| INPUT SENSITIVITY |
|
| Mic |
-36dBu (-38.2dBv or 12.28mVrms) |
| Rca |
0dBu (-2.2dBv or 0.775Vrms) |
| Line |
+4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level +22dBu |
| CONNECTORS |
|
| Input connectors A |
Switchable balanced mic or line level input XLR / ¼" Combo jack |
| Input connectors B |
Line level combo jack: 1/4" -XLR / Summed dual RCA jacks |
| Line output type |
Switchable LOOP / MIX Balanced Male XLR connector, Balanced: 1k ohm - Unbalanced: 500 ohm, +4dBu (1.78dBv or 1.228Vrms) |
| INPUT IMPEDANCE |
|
| Line input A |
20kΩ - Unbalanced: 10kΩ Maximum Input Level +22dBu |
| Line input B |
20kΩ - Unbalanced: 10kΩ Maximum Input Level +22dBu+BV22 |
| Main eq |
High (±10dB) 10kHz Shelving
Low (±10dB) 100Hz Shelving, Bass Response Optimizer ("BRO"™) circuit '+5dB at 60Hz, Subsonic Filter 30Hz, Second-order filter |
| DIMENSIONS & WEIGHT |
|
| Height ( mm / ins ) |
556mm / 21.88" |
| Width Front / Rear / mm / ins |
384mm / 15.11"-180mm / 7.1" |
| Depth ( mm / ins ) |
312mm / 12.28" |
| Net weight ( kg / lbs ) |
13.3kg / 28.16lbs |
| Gross weight ( kg / lbs ) |
14.8kg / 32.56lbs |
|
TITAN12D Active Black 300W 12" 2-Way ABS Moulded Speaker $799.00 each inc GST
TITAN12BAG Bag for Titan 12 $69.00 each inc GST
TITANWBB Titan 12 or 15 Wall mount bracket Black $75.00 each inc GST
TITANWBW Titan 12 or 15 Wall mount bracket White $75.00 each inc GST
|
TITAN-15D
SPECIFICATIONS: |
| MODEL |
TITAN 15 ACTIVE |
| GENERAL INFO |
|
| System type |
Active 15" 2-way Bi-Amplified |
| Frequency response +/- 3db |
50-20kHz |
| HF SECTION |
|
| Hf type |
Titanium Compression Driver |
| Horn dispersion (H x V) |
90° x 60° |
| Hf exit size mm / inches |
25mm / 1" |
| PHYSICAL FEATURES |
|
| Enclosure Material |
Injection Moulded Polypropylene |
| Enclosure Colour |
Black |
| Size (mm/inches) |
381mm / 15" |
| IN / OUT PANEL (speaker Level) |
|
| Input connector |
XLR - 1/ 4" Combo jack |
| AMPLIFIER POWER |
|
| Power On Protection |
Power switch on / off mute |
| Thermal Protection |
Amplifier shutdown, auto reset |
| Low Line Voltage Shut Down |
60% Nominal line voltage |
| Driver Protection |
Independent LF and HF limiters |
| DC Protection |
Yes |
| Short Protection |
Yes |
| Controls |
High (±10dB) 10kHz Shelving |
| Dimensions (HxWxD) |
|
| mm |
708.3mm x 477.8mm x 401.77mm |
| inches |
27.9" x 18.8" x 15.8" |
| Microphone / Transmitter |
|
| Maximum Input Level |
+22dBu |
| Impedance |
4 Ω |
| MIXER MODEL |
|
| INPUT IMPEDANCE |
Balanced: 20k ohms Unbalanced: 10k ohms |
| Clip Limiter |
Turns on approx 350W output |
| Limiter Indicator |
Red LED |
| Power Indicator |
Red LED |
| AC Power details |
|
| Power Supply |
High Efficiency Switching Mode Power Supply |
| AC Power Options |
AC100~120V / 220~240V, 50 / 60Hz |
| Power On Indicator |
LED |
| Rigging / Bracket / |
10 M8 threaded inserts including 4 |
| Mounting Options |
M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket |
| Impedance Balanced |
Balanced: 1k ohm - Unbalanced: 500 ohm |
| Line Output |
|
| Line Output Connector |
Switchable LOOP / MIX Balanced Male XLR |
| Input A - type |
Switchable balanced mic or line level input |
| Input Sensitivity |
Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) |
| Maximum Input Level |
+22dBu |
| Input Connector |
XLR - 1/ 4" Combo jack |
| Input Impedance |
Balanced: 20k ohms Unbalanced: 10k ohms |
| Input B - type |
Line level input |
| Input Sensitivity |
XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) |
| Maximum Input Level |
+22dBu |
| Input Connectors |
Combo jack: 1/4" - XLR / Summed dual RCA jacks |
| Bass Response Optimizer |
|
| ("BRO"™) circuit |
+5dB at 60Hz |
| Subsonic Filter |
30Hz, Second-order filter |
| Amplifiers |
|
| Low-Frequency (Class D) |
Rated 350W RMS, 700W Peak |
| High- Frequency (Class A/B) |
Rated 70W RMS, 140W Peak |
| Electronic Crossover |
24dB/octave Linkwitz-Riley |
| Crossover Frequency |
1.8kHz |
| Controls |
High (±10dB) 10kHz Shelving |
| Equalization |
Low (±10dB) 100Hz Shelving |
| DIMENSIONS & WEIGHT |
|
| Net weight ( kg / lbs ) |
23.7kg / 52.67lbs |
| Gross weight ( kg / lbs ) |
26.94kg / 59.27lbs |
|
TITAN15D Active Black 420W 15" 2-Way ABS Moulded Speaker $899.00 each inc GST
TITAN15BAG Bag for Titan 15 $99.00 each inc GST
TITANWBB Titan 12 or 15 Wall mount bracket Black $75.00 each inc GST
TITANWBW Titan 12 or 15 Wall mount bracket White $75.00 each inc GST
|
TITAN-12ASUB
The TITAN™ Sub-A12 is powerful 12 inch band pass active subwoofer. A built-in 250 watt (continuous) 500 watt (peak) amplifier conveniently accepts stereo or mono line level inputs via dual, balanced, XLR-¼" "combo" connectors as well as a unique single channel 4Ω speaker level input via a ¼" phone jack which allows for use with a standard sound reinforcement amplifier (when the internal amplifier is not used).
SPECIFICATIONS: |
| MODEL |
TITAN SUB-A12 |
| GENERAL INFO |
|
| System type |
Reflex subwoofer |
| Frequency response +/- 3db |
55-200Hz |
| CROSSOVER SECTION |
|
| Crossover Frequency / Filter |
80Hz/100Hz/120Hz/150Hz/180Hz/200Hz (adjustable) |
| PHYSICAL FEATURES |
|
| Enclosure Material |
15mm MDF |
| Enclosure Colour |
Grey |
| Size (mm/inches) |
305mm / 12" |
| Coil Size (mm/inches) |
64.26mm / 2.5" |
| Frame Material |
steel frame |
| AMPLIFIER POWER |
|
| Continous RMS |
250W |
| Peak (Wats) |
500W |
| Power on indicator |
LED |
| Power On Protection |
Power switch on / off mute |
| Thermal Protection |
Amplifier shutdown, auto reset |
| Low Line Voltage Shut Down |
60% Nominal line voltage |
| Driver Protection |
Independent LF limiters |
| DC Protection |
Yes |
| Short Protection |
Yes |
| INPUT SENSITIVITY |
0.37V |
| Impedance |
4 ohm |
| Speaker Pole Adapter |
Yes |
| Inputs A & B Type / Connection |
Balanced Line Level inputs via two combo connectors |
| Outputs A & B Type / Connection |
Balanced Line Level inputs via two combo connectors |
| High Pass Frequency Selection |
150Hz |
| Phase Switch Selection |
0° / 180° |
| Clip Limiter |
Turns on approx 250W output |
| Limiter Indicator |
Red LED |
| Power Indicator |
Blue LED |
| DIMENSIONS & WEIGHT |
|
| Height ( mm / ins ) |
360.0mm / 14.2" |
| Width Front / Rear / mm / ins |
493.0mm / 19.4" |
| Depth ( mm / ins ) |
431.0mm / 16.9" |
| Net weight ( kg / lbs ) |
22.31kg /49.0lbs |
| Gross weight ( kg / lbs ) |
26.26kg / 57.8lbs |
|
TITAN12ASUB Active 12'' Subwoofer, 250W RMS, Birch / Plywood $799.00 each inc GST
|
TITAN-15ASUB
The TITAN™ Sub-A15 is powerful 15 inch band pass active subwoofer. A built-in 400 watt (continuous) 600 watt (peak) amplifier conveniently accepts stereo or mono line level inputs via dual, balanced, XLR-¼" "combo" connectors as well as a unique single channel 4Ω speaker level input via a ¼" phone jack which allows for use with a standard sound reinforcement amplifier (when the internal amplifier is not used).
SPECIFICATIONS: |
| MODEL |
TITAN SUB-A15 |
| GENERAL INFO |
|
| System type |
Band-pass subwoofer |
| Frequency response +/- 3db |
45-150Hz |
| PHYSICAL FEATURES |
|
| Enclosure Material |
18mm Plywood |
| Enclosure Colour |
Grey |
| Size (mm/inches) |
404 / 15" |
| Coil Size (mm/inches) |
75 / 3" |
| Frame Material |
Die-cast aluminium frame |
| AMPLIFIER POWER |
|
| Continous RMS |
400W |
| Peak (Wats) |
600W |
| ProtectionType |
Dynamic AGC |
| Power on indicator |
LED |
| INPUT SENSITIVITY |
0.775V |
| Impedance |
4 Ω |
| Speaker Pole Adapter |
Yes |
| Inputs A & B Type / Connection |
Balanced Line Level inputs via two combo connectors |
| Outputs A & B Type / Connection |
Balanced Line Level inputs via two XLR-M connectors |
| High Pass Frequency Selection |
100Hz |
| Phase Switch Selection |
0° / 180° |
| Speaker Level Input Impedance |
1/4" TS Phone input |
| Speaker Level Input Connection |
4 Ω |
| DIMENSIONS & WEIGHT |
|
| Height ( mm / ins ) |
630.0 / 24.8" |
| Width Front / Rear / mm / ins |
478.0 / 18.8" |
| Depth ( mm / ins ) |
640.0 / 25.2" |
| Net weight ( kg / lbs ) |
45.48 / 100.0 |
| Gross weight ( kg / lbs ) |
50.48 / 110.5 |
|
TITAN15ASUB Active 15'' Subwoofer, 400W RMS, Birch / Plywood $899.00 each inc GST
TITAN15SUBBAG Bag for Titan 15 Sub $99.00 each inc GST
|
